This Listing is for our Other Gates that we have manufactured ourselves. The reason they are so cheap is because the gates are classed as old/stock or seconds. These will be either gates that have been made to measure for a customer that has cancelled through us directly, may show slight defects (Excessive Wood Knots, Scuffs or Scratches) or have been in our factory or stored on the yard for a few months which may have left mild fading etc.
When ordering:
Select a gate from the drop-down menu. (Below is breakdown the dropdown)
Part One:
Type of Gate: Picket, Pale, Tuscany, Vogue and others (Please images for what you will receive).
Part Two:
"AT-"
Meaning Arch Top Design
"FT-"
Meaning Flat Top Design
Part Two:
"SB-"
Semi Braced meaning they are not Fully Framed meaning they are framed top, middle and bottom and are not framed down the sides of the gate.
"FF-"
Fully Framed meaning they are framed top, middle and bottom and are framed down the sides of the gate for added strength.
Part Three:
"H."
Height of the Gate in millimetres. if Arch Top the Height is to the top of the Arch
"W."
Width of the Gate in millimetres. If Driveway it has took two gates to achieve the full width displayed
All the Tongue & Groove boards used are 125mm wide and 13mm thick. The gates are made using 34x70mm framing (approx.)
We do offer a Made to measure bespoke gate making service but those gates are not as cheap as what is listed here.
Listing Disclaimer
Please check your order thoroughly as there are NO RETURNS accepted on these gates. If you are unsure then just contact us.
Images are for illustration purposes only
Bracing may differ to images due to depending on requirements at time of build
You are purchasing a listing for a New item but may show defects